Lähdekoodi sivulle ITSFactory siriaccess developerguide

During its beta phase, the ITS Factory SIRI Access responds to requests in urls:
* http://178.217.134.37:8080/siriaccess/vm/siri (SIRI XML documents over HTTP POST)
* http://178.217.134.37:8080/siriaccess/vm/rest (SIRI JSON documents over HTTP GET)

Both URLs will support following SIRI modules:
* Vehicle Monitoring, VM (Currently available in beta phase)
* General Messaging, GM (Currently not available, planned)

== Vehicle Monitoring ==
SIRI vehicle monitoring, or VM, offers real-time location related information on monitored vehicles (busses). A client can request information on all active vehicles or limit its request to certain bus line or vehicle. The data contains the current state of vehicle transit, history data is not currently available.
 
=== SIRI XML documents over HTTP POST ===
The URL supports standard SIRI XML document exchange as defined in http://www.kizoom.com/standards/siri/, the SIRI version is 1.3 as defined in http://www.kizoom.com/standards/siri/schema/1.3/siri.xsd

==== Requests ====
To communicate with this URL, the client must send XML formatted SIRI requests via HTTP POST. The server will response with proper SIRI XML response. SIRI Subscriptions are not supported by this URL. A minimalist request to access all vehicle monitoring data is as follows:

<pre>
<?xml version="1.0" encoding="UTF-8"?>
<Siri xmlns="http://www.siri.org.uk/siri" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.3" 
  xsi:schemaLocation="http://www.kizoom.com/standards/siri/schema/1.3/siri.xsd">
	<ServiceRequest>
			<VehicleMonitoringRequest version="1.3">
				<VehicleMonitoringRef>VEHICLES_ALL</VehicleMonitoringRef>
			</VehicleMonitoringRequest>
	</ServiceRequest>
</Siri>
</pre>

To access vehicle monitoring data for certain line, a minimalist request would be:
<pre>
<?xml version="1.0" encoding="UTF-8"?>
<Siri xmlns="http://www.siri.org.uk/siri" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.3" 
	xsi:schemaLocation="http://www.kizoom.com/standards/siri/schema/1.3/siri.xsd">
	<ServiceRequest>
			<VehicleMonitoringRequest version="1.3">
				<LineRef>23</LineRef>
			</VehicleMonitoringRequest>
	</ServiceRequest>
</Siri>
</pre>
To access vehicle monitoring data for certain vehicle, a minimalist request would be:
<pre>
<?xml version="1.0" encoding="UTF-8"?>
<Siri xmlns="http://www.siri.org.uk/siri" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.3" 
	xsi:schemaLocation="http://www.kizoom.com/standards/siri/schema/1.3/siri.xsd">
	<ServiceRequest>
			<VehicleMonitoringRequest version="1.3">
				<VehicleRef>TKL_123</VehicleRef>
			</VehicleMonitoringRequest>
	</ServiceRequest>
</Siri>
</pre>

==== Responses ====
Following response is an example of data collected from vehicle (bus) TKL_248 operating on line 30. The response follows SIRI standards, so you can get the whole picture from there, however here we explain few key fields:
* LineRef specifies the line where the bus is currently operating. 
* DirectionRef sepecifies the direction the bus is travelling on the line. 1 = from origin stop to destination stop, 2= from destination stop back to origin stop.
* DataFrameRef specifies the date when the vehicle started from the origin or destination stop (depending on the DirectionRef)
* DatedVehicleJorneyRef specifies the time when the vehicle started from the origin or destination stop (depending on the DirectionRef)
* OriginName specifies the name of the stop where the vehicle started
* DestinationName specifies the name of the stop where the bus is heading to
* Latitude and Longitude specifies the map position of the vehicle at the time of the response
* Bearing specifies the direction the vehicle is travelling
* Delay specifies the relative time the vehicle is behind or ahead of its planned schedule
* VehicleRef uniquely identifies the monitored vehicle 

<pre>
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Siri xmlns="http://www.siri.org.uk/siri" xmlns:ns2="http://www.ifopt.org.uk/acsb" xmlns:ns3="http://www.ifopt.org.uk/ifopt" 
	xmlns:ns4="http://datex2.eu/schema/1_0/1_0" version="1.3">
	<ServiceDelivery>
		<ResponseTimestamp>2013-04-24T09:41:42.486+03:00</ResponseTimestamp>
		<ProducerRef>IJ2010</ProducerRef>
		<Status>true</Status>
		<MoreData>false</MoreData>
		<VehicleMonitoringDelivery version="1.3">
			<ResponseTimestamp>2013-04-24T09:41:42.486+03:00</ResponseTimestamp>
			<Status>true</Status>
			<VehicleActivity>
				<RecordedAtTime>2013-04-24T09:41:42.173+03:00</RecordedAtTime>
				<ValidUntilTime>2013-04-24T09:42:12.173+03:00</ValidUntilTime>
				<MonitoredVehicleJourney>
					<LineRef>30</LineRef>
					<DirectionRef>2</DirectionRef>
					<FramedVehicleJourneyRef>
						<DataFrameRef>2013-04-24</DataFrameRef>
						<DatedVehicleJourneyRef>0935</DatedVehicleJourneyRef>
					</FramedVehicleJourneyRef>
					<OperatorRef/>
					<OriginName xml:lang="fi">Keskustori M</OriginName>
					<DestinationName xml:lang="fi">Etelä-Hervanta</DestinationName>
					<Monitored>true</Monitored>
					<VehicleLocation>
						<Longitude>23.77120000000000032969182939268648624420166015625</Longitude>
						<Latitude>61.4919000000000011141310096718370914459228515625</Latitude>
					</VehicleLocation>
					<Bearing>148.0</Bearing>
					<Delay>P0Y0M0DT0H2M58.000S</Delay>
					<VehicleRef>TKL_248</VehicleRef>
				</MonitoredVehicleJourney>
			</VehicleActivity>
		</VehicleMonitoringDelivery>
	</ServiceDelivery>
</Siri>
</pre>

=== SIRI JSON documents over HTTP GET ===
Rest access responds to HTTP GET requests and returns JSON formatted textual data. The data itself is structured and named like standard SIRI XML responses (it is just converted from SIRI XML to JSON notation). This allows the client avoid XML request parsing which is typically cumbersome for example to JavaScript clients.

To access the SIRI vehicle monitoring client must send HTTP GET requests to http://178.217.134.37:8080/siriaccess/vm/rest

The URL supports following parameters
* lineRef=<string>
* vehicleRef=<string>
* indent=<yes|no>

==== Url examples ====
* http://178.217.134.37:8080/siriaccess/vm/rest returns data for all vehicles
* http://178.217.134.37:8080/siriaccess/vm/rest?lineRef=22 returns data for all vehicles currently operating on specified line
* http://178.217.134.37:8080/siriaccess/vm/rest?vehicleRef=paunu_155 returns data for specified vehicle
* http://178.217.134.37:8080/siriaccess/vm/rest?indent=yes returns data in human readable format, indent parameter works also in conjunction with lineRef and vehicleRef parameters, for example http://178.217.134.37:8080/siriaccess/vm/rest?indent=yes&lineRef=22